NANO RX2000 - Charging Your Hearing Aid; Charging Instructions and Best Practices

Charging your
device
1
2
3
Plug your wall charger to an electrical outlet. Charge
your device for 8 hours before using it for the rst time,
consequent charges shouldn’t exceed 4+ hours.
Plug your USB into the wall charger. Plug the other end
of the USB cable to your device.
The charging case will stay a solid green when fully
charged. Individual charging indicators will be orange
while charging, solid green when done. If you don’t
have a charging case, simply connect the hearing aids
to the USB included and connect the other end to the
wall charger directly.
14