Nanoleaf Elements - Important Installation Tips; PSU Capacity and Layout Planning; Surface Preparation for Mounting; Panel Mounting Technique

Important Installation Tips
lx
•
42W
Make sure you hove enough PSUs for your layout. NOTE: Each standard PSU
supports up to 42W. Use our PSU calculator online at go . nanoleaf . me/myelements .
To mount, apply strong pressure
in a circular motion to the center of
the panel for 30 seconds.
♦
•
The Controller and Power Supply
Unit con be connected to any panel
in your setup .
& z:::,,a!==-=-=---- ....
◊◊
◊
Before mounting your panels ,
clean your surface to be free of
dust, moisture and oil.
Tope 1s NOT suitable for textured,
porous, popcorn and ceiling surfaces
(ie. wallpaper or brick walls).