Napa CARLYLE DTW39FL User Manual

DTW38FL, DTW12FL 1 Rev. 01/23/13
DTW39FL, DTW12FL
3/8" Torque Range .....................................5.0-99.5 ft.-lbs.
1/2" Torque Range ...................................12.5-250.0 ft.-lbs.
Torque Accuracy (*1) ............................ (CW ±2%) (CCW ±3%)
Angle Accuracy (*2) ............... +/- 2° ( rotating 90° at speed of 30°/sec)
Angle Range.................................................1˚-360˚
Data Memory Values ............................................ 50
Number of Presets ................................................ 9
Operation Modes .....................................Peak Hold/Track
Unit Selection..........................N-m, in-lb, ft-lb, kg-cm & Degrees
Head Type .............................................Flex Ratchet
Gear teeth ..................................................... 36
Audible Alarm...................................................Yes
Buttons......................................................... 5
LED Indicator ..............................................12 LED's
Batteries ......................................................2 AA
Battery Life-Continuous Operation (*3) ............................60 Hrs
Battery Life-Standby (*3) ....................................... 1 Year
Operating Temperature ...................................14ºF ~ 140ºF
Storage Temperature .....................................-4ºF ~ 158ºF
Humidity ...................................Up to 90% non-condensing
ALWAYS READ
INSTRUCTIONS
BEFORE USING
TOOLS
ALWAYS WEAR
SAFETY
GOGGLES
NOT
WATERPROOF
DTW38FL, DTW12FL
3/8" and 1/2" Digital Torque Wrenches with Angle Indicator
WARNING
SPECIFICATIONS

Napa CARLYLE DTW39FL Specifications

General

Brand	Napa
Model	CARLYLE DTW39FL
Category	Power Tool
Language	English

Summary

Specifications

Warning - Follow These Rules for Safe Operation!

Safe Operation Guidelines

Crucial safety instructions to prevent injury and property damage during tool use.

Warranty

Features and Functions

Replacement Parts

Lists available replacement parts for Carlyle torque wrench models.

Assembly Parts Identification

Identifies parts needed for assembly and the required tools.

Replacing the Head Kit

Before Using the Wrench

Battery Installation

Instructions for correctly installing AA batteries into the wrench.

Set Up

Control Panel Overview

Description of the wrench's control buttons and their functions.

Power On and Resetting

Angle Mode Warning

Sleep Mode

Low Battery Voltage Protection

Selecting Units of Measure

Setting Torque Values

Resetting Preset Torque Values

Selecting Track and Peak Modes

Track Mode

Peak Hold Mode

Storing Peak Hold Values

Procedure for storing individual torque values in peak hold memory.

Viewing Peak Hold Values

How to access and review stored peak hold torque values.

Peak Hold Mode (Continued)

Deleting a Peak Hold Value

Steps to remove a single stored peak hold torque value.

Deleting All Peak Hold Values

Procedure for clearing all stored peak hold torque values.

Using Angle Function

Setting Angle Values

How to set desired angle values and presets on the wrench.

Resetting Preset Angle Values

Procedure for changing preset angle values stored in memory.

Using Angle Mode

Changing Unit of Measure

Steps to select the desired unit of measure for angle display.

Storing Angle Values

Instructions for saving achieved angle values into memory.

Troubleshooting

Error Codes for Angle Feature Torque Wrenches

Explanation of error codes, causes, and corrective actions.

Viewing and Deleting Angle Values