Need help?Do you have a question about the NAPCO Magnum Alert 3000 Series and is the answer not in the manual?
General| Type | Security System |
|---|---|
| Model | Magnum Alert 3000 Series |
| Keypad Programming | Yes |
| Communication Formats | Contact ID, SIA, 4+2 |
| Power Supply Voltage | 16.5 VAC |
| Power Supply | Transformer |
| Keypad | LCD Keypad |
| Communication | Phone Line |
| Partitions | 2 |
| Battery Backup | 12V 7AH Sealed Lead Acid |
Overview of the Magnum Alert 3000 Series as a state-of-the-art microcomputer-based alarm control panel.
Details control panel, communicator, and keypad features of the MA3000 series alarm system.
Details the UL listings for the MA3000 alarm control unit for various applications and system types.
Lists the essential equipment required for UL compliance for burglary, commercial fire, and residential fire/burglary systems.
Outlines general requirements for commercial fire alarm system installations, including programming and specific accessories.
Details minimum requirements for a Grade-A local mercantile alarm installation, including specific components.
Provides steps for testing the installed alarm system, including initiating alarms and verifying central station receipt.
Steps for initial panel configuration using PCD3000 software or keypad programming.
Step-by-step guide to configure the RP3000LCD keypad, including beep, address, compatibility, and zone response.
Configuration steps for the CF3000LCD keypad, focusing on address, compatibility, and system settings.
Overview of programming user codes, exit/entry times, and zone descriptions via the keypad.
Instructions for bypassing zones using the RP3000LCD keypad, including methods and cancellation.
How to disable fire zones using Selective Bypass on RP3000LCD and CF3000LCD keypads.
Explains how to access and use the various utility functions available in the RP3000LCD Function Mode.
Accessing troubleshooting aids like FAULT FIND, ACTIVATE LOCATE, and EZM ZONE FIND.
Continues detailing RP3000LCD Function Mode options like AUTOARM FUNC, AUTO ARM SCHED, ACTIVATE PROGRAM, and DOWNLOAD.
Overview of utility functions available in the CF3000LCD Menu Mode, including alarms, troubles, and system logs.
Continues detailing CF3000LCD Menu Mode options like ALARMS, TROUBLES, and SYSTEM LOGS.
Explains local and remote downloading procedures using IBM PC and Napco PCD3000 software.
Introduces keypad programming for User and Dealer modes, noting Commercial Fire limitations.
Specific functions programmable via the keypad in Dealer Program Mode, like Program Code and Date/Time.
Details the four Form-C relay outputs for burglary, fire, auxiliary, and reset functions.
Continues detailing alarm outputs and provides a table summarizing wiring for signalling alarms.
Programming requirements for commercial fire systems to distinguish alarms from burglary.
Explains entry and exit delays, including programmable times and keypad warnings.
Instructions for connecting and programming two-wire and four-wire smoke detectors.
Details programming user codes, authority levels, and access bytes.
Detailed guide for programming user codes and zone descriptions via keypad.
To Next Page