Need help?Do you have a question about the NAPCO Magnum Alert 800 and is the answer not in the manual?
General| Keypads Supported | Up to 4 Keypads |
|---|---|
| Alarm Memory | Yes |
| Power Supply | 120V AC, 60Hz |
| Battery Backup | 12V DC, 4AH |
| Communication | Phone Line |
| Dimensions | 12" x 10" x 3" (approximate) |
| Zones | 8 Hardwired Zones |
Independent circuits protecting specific areas.
The system has up to six separate zones for area protection.
Performs arm/disarm, status checks, and zone shunting.
How the Control Center responds to zone activation.
Procedure for choosing a private code to arm/disarm.
How to arm and disarm the system using your code.
Steps to modify your existing personal code.
Steps to ensure the system is armed before you depart.
Handling system arming when a zone has a fault condition.
How to manually bypass zones when arming the system.
Procedure for disarming the system when entering premises.
Manually bypassing specific zones for perimeter protection.
Actions for alarms occurring when the system is not armed.
Pressing specific keypad buttons to alert for help.
The panic function is always active, regardless of system arming.
How the digital communicator transmits signals to a central station.
Procedure to clear smoke detectors after a fire alarm.
Critical safety instructions for escaping a fire.
To Next Page
