Need help?Do you have a question about the NAPCO XP-600 - 9-16-1997 and is the answer not in the manual?
General| Brand | NAPCO |
|---|---|
| Model | XP-600 - 9-16-1997 |
| Category | Security System |
| Language | English |
Tests the bell or siren for 2 seconds and initiates a battery test.
Test system communication with the central station, typically on weekends.
Keys used for entering codes, functions, bypassing zones, and emergency signals.
Describes Armed, Ready, System, Fire, AC, and Zone lights and their meanings.
Used to reset fire zones, clear codes, and reset alarm memory.
Procedure to arm the system before exiting the premises.
Allows non-regular users to arm the system easily with specific key presses.
Temporarily disabling specific zones that cannot be secured before arming.
Arming the system while occupants are home, potentially bypassing interior zones.
Activates "Instant" mode by cancelling Entry delay for immediate alarm response.
Allows a user to exit through the Exit/Entry door for a short period while armed.
Guidance on how to arm the system when a system trouble condition exists.
Describes Fire, Auxiliary, Police, and Ambush emergency buttons and their actions.
Procedures for activating Fire, Auxiliary, and Police alarms and alerting the central station.
Activated by disarming with a special code to send a silent alarm to Central Station.
Steps to disarm the system upon entering the premises.
How to recognize an alarm occurred while the system was unattended.
How to silence a burglary alarm and reset the alarm memory.
Steps to silence a fire alarm and reset the fire zone.
Guidance on creating a fire escape plan including floor plans and meeting spots.
Rehearsing fire escape procedures for all household members.
Critical safety advice for fire escape procedures and actions.
A designated space to draw a floor plan for fire escape planning.
Describes Easy Arm, Easy Exit, and Bell/Battery Test functions.
Access Output, Instant Mode, and Chime Mode controls.
Access Program Mode and toggle Keypad Sounder On/Off.
Explains SYSTEM light, beeps, and troubles like AC Failure, Low Battery, and Communication Failure.
Details troubles related to Telephone Line Cut and Bell/Siren faults.
Covers Fire Trouble, Wireless Receiver issues, and Transmitter problems.
Details low battery issues for wireless devices and general zone troubles.
Steps to enter the User Program Mode using User 1 Code and specific keys.
Instructions for programming or changing user codes for the system.
Procedure to remove a previously programmed user code from the system.
Definitions for Ambush Code, Arming/Disarming, Auto Interior Bypass, and Battery.
Definitions for Bypass, Central Station, Chime, Easy Exit, and Exit/Entry Delay.
Definitions for Exit/Entry Zone, Instant Protection, Keypad Sounder, System Trouble, User Codes, and Zone.
To Next Page