NAPCO Magnum Alert 800 User Manual

lndlcator ughts
-/-n=Y wm 1-1
l Steady - system is armed.
l Flashes - system is in alarm.
Count the number of flashes to
tell in which zone the alarm
occurred. Example: Fourflashes-
alarm in Zone 4.
smU9Mf-l
l Steady - system is disarmed, all
zones okay.
l Flashes - zone in trouble (in-
capable of being armed). Count
the number of flashes to deter-
mine zone(s). Example: Four
flashes - trouble in Zone 4.
shunt Ught (Y8lknw)
l Steady - one or more zones are
shunted (bypassed) from the
system.
MlnCSoundar
l When you enter your premises,
the tone reminds you to reset
the Control Center before the
end of a timed entry period so
you do not activate the alarm.
The Mini-Sounder also sounds
if you attempt to arm the system
when a particular zone is in
trouble.
r
’ I
IShunt
Ylnl-Soundor
Pmk
Faceplate of Digit-Key keypad
lifts up to reveal convenient ref-
erence index of zones protected.
Technical Manuals Online! - http://www.tech-man.com

NAPCO Magnum Alert 800 Specifications

General

Brand	NAPCO
Model	Magnum Alert 800
Category	Security System
Language	English