To Next PageTo Next PageWhat does it mean if my Napoleon Luminex LED is flashing “E29”?
If the LED on your Napoleon Indoor Fireplace is flashing “E29”, it means the device is unable to connect during Wi-Fi setup. Resume the Wi-Fi setting up mode and try reconnecting the unit.
Why is the flame on my Napoleon Luminex Indoor Fireplace dim or not visible?
If the flame on your Napoleon Indoor Fireplace is dim or not visible, the flame brightness might not be properly selected. Also, there may be an issue with the Flame LEDs. Inspect the LED and replace if necessary. Finally, there can be a Main PCB board issue. Inspect the main PCB board and replace if necessary.
Why is the ember bed on my Napoleon Luminex Indoor Fireplace not glowing or dimming?
If the ember bed on your Napoleon Indoor Fireplace is not glowing or is dimming, the brightness might not be selected. See “operation” section. Also, there may be an Ember LED issue. Inspect the ember bed LEDs and replace if necessary. Finally, there can be a Main PCB board issue. Inspect the main PCB board and replace if necessary.
General| Brand | Napoleon |
|---|---|
| Model | Luminex Series |
| Category | Indoor Fireplace |
| Language | English |
Essential safety precautions for appliance operation, covering fire, explosion, and personal injury risks.
Advises of potential exposure to chemicals known to cause cancer or reproductive harm.
Details compliance with Federal Communications Commission rules for electronic devices.
Provides detailed physical dimensions, diagrams, and measurements of the appliance.
Lists product certifications and approvals against safety standards for Canada and USA.
Outlines general guidelines for appliance installation, initial use, and basic operation.
Step-by-step instructions for safely unpacking and performing initial tests on the appliance.
Comprehensive list of all included hardware components with item references for installation.
Explains the significance and location of the appliance's rating plate details.
Illustrates the precise locations of all safety and identification labels on the appliance.
Specifies required clearances around the mantel and top for safe and proper installation.
Guidelines and requirements for constructing the rough framing for appliance installation.
Steps for preparing the appliance for different viewing configurations before final installation.
Detailed installation instructions for the three-sided viewing configuration.
Detailed installation instructions for the two-sided viewing configuration.
Detailed installation instructions for the single-sided viewing configuration.
Final installation tasks including wiring, testing, and securing the appliance.
Comprehensive instructions for hard-wiring the appliance using a 120V electrical connection.
Comprehensive instructions for hard-wiring the appliance using a 240V electrical connection.
Steps for installing the optional wall-mount controller for the appliance.
Guidance on using both combustible and non-combustible materials for finishing.
Identifies specific areas on the appliance for safe screw placement during finishing.
Instructions for preparing the appliance and installing media elements like logs and rocks.
Detailed steps for arranging logs, rocks, and charcoal for aesthetic appeal.
Procedures for safely removing and reinstalling the appliance's front glass panel.
Explains the functions of buttons, indicators, and display on the control panel.
Details the features and operation of the included remote control for the appliance.
Describes the functions and operation of the optional wall-mount control unit.
Guide to connecting and operating the appliance via Wi-Fi using the remote control.
Instructions for controlling the appliance's power (On/Off) via the mobile app.
Details on selecting heater modes (On, Fan, ECO, Boost, Thermostat) via the app.
How to adjust ember bed colors and brightness levels using the mobile app.
Customizing flame colors, speed, and brightness through the Napoleon Home App.
Controls for accessory lighting, including top and side lights, via the mobile app.
Setting up custom schedules and timers for appliance operation using the app.
Step-by-step guide for cleaning different parts of the appliance safely and effectively.
Information on the purpose and location of the heater lockout safety switch.
General information and procedures for ordering replacement parts for the appliance.
A detailed list of specific replacement parts for the NEFL65LCD-3SV model.
