Napoleon SRPH02S User Manual

If you smell gas:
1. Shut off gas to the appliance.
2. Extinguish any open flame.
3. If odor continues, keep away from
the appliance and immediately call
your gas supplier or fire department.
Do not store or use gasoline or
other flammable vapors and liquids
in the vicinity of this or any other
appliance.
DANGER
WARNING
WARNING
For Outdoor Use Only.
CAUTION:
Installer: Leave the instruction manual
with the user for future use.
Consumer: Please keep this manual
for future reference.
Read the instructions before use.
This appliance must be installed in
accordance with such regulations as
are in force.
Owner’s Manual
An LP-cylinder not connected for use
shall not be stored in the vicinity of
this or any other appliance.
Model#: SRPH02-XXXX
Deluxe Outdoor
Patio Heater
Customer I tem No.: PTH38PSS
PTH38PGM
PTH38PCP
Standard: ANS Z83.26-2007 / CSA 2.37-2007 & ANS Z83.26a-2008/CSA 2.37a-2008
Gas-Fired Outdoor Infrared Patio Heaters

Napoleon SRPH02S Specifications

General

Brand	Napoleon
Model	SRPH02S
Category	Patio Heater
Language	English

Summary

PRECAUTIONS

DANGER CARBON MONOXIDE HAZARD

Critical warning about carbon monoxide poisoning risk in enclosed spaces.

WARNING: Improper Installation Risks

Highlights dangers of incorrect installation, alteration, or service leading to injury or death.

SPECIFICATION

CSA Certification

Details the CSA certification standard for the appliance.

Physical Dimensions

Provides overall height and reflector diameter specifications.

Performance Ratings

Lists rated heat input, fuel type, and gas supply details.

Safety Features & Pressure

Outlines safety features and gas supply pressure requirements.

PRECAUTIONS - Safety Rules

General Safety Rules

Essential safety rules for installation, grounding, leak checks, and proximity to flammables.

User Safety Precautions

Advises on hazards of high temperatures, child supervision, and flammable materials.

PRECAUTIONS - LP Gas Safety

Enclosure & LP Gas Safety

Covers enclosure limitations, proper LP cylinder use, storage, and handling safety.

PREPARATION

Assembly Preparation

Instructions to check parts before assembly and contact customer service for replacements.

Tools and Time

Lists required tools (not included) and estimated assembly time.

PARTS LIST / EXPLODED VIEW

Component Identification

Detailed list and visual diagram of all heater parts and hardware components.

ASSEMBLY - Part 1

Step 1: Pole Attachment

Instructions for attaching the pole to the pole support using bolts and washers.

Step 2: Cylinder Cover Attachment

Guide for sliding the cylinder cover over the pole support.

ASSEMBLY - Part 2

Step 3: Burner Head Assembly

Steps to attach the burner head assembly to the pole using bolts and washers.

Step 4: Top Bolt Attachment

Instructions for fastening the top of the burner head assembly with bolts and washers.

ASSEMBLY - Part 3

Step 5: Reflector Assembly

Details on joining reflector pieces using connectors and bolts.

Step 6: Reflector & Cap Attachment

Instructions for attaching the reflector assembly, decorative cap, and nut.

ASSEMBLY - Part 4

Step 7: Cylinder & Regulator Installation

Steps for placing the cylinder, attaching the regulator, and securing the cover.

Step 8: Final Cover Placement

Instructions for lowering the cylinder cover onto the base.

Step 9: Disconnecting Cylinder

Procedure for safely disconnecting the cylinder for storage or transport.

SAFETY CHECK

Leak Detection Procedure

Step-by-step guide to check for gas leaks using a soapy solution at connections.

Cylinder System Notes

Important notes on cylinder supply system arrangement and valve protection.

IGNITER BATTERY INSTALLATION

Battery Replacement Guide

Instructions for removing the igniter button and installing a replacement AAA battery correctly.

OPERATION - Initial

Pre-Operation Checks

Essential checks before turning on gas, including safety and ventilation.

Pre-Lighting Procedures

Steps and checks required before attempting to light the heater.

Initial Lighting Steps

First steps for initiating the lighting sequence, including knob and valve operations.

OPERATION - Lighting & Flames

Pilot Lighting Sequence

Detailed instructions for lighting the pilot and transitioning to main burner operation.

Flame Characteristics

Guidance on visually checking flame patterns and identifying potential issues.

OPERATION - Usage & Leaks

Initial Use Odor

Information about smoke and odor during the first use, which should dissipate.

Normal Operation Indicators

Describes expected emitter screen color, flame appearance, and potential issues.

Re-lighting and Shutdown

Procedures for re-lighting a hot heater and for safe shutdown and turning off the gas.

Gas Leakage Response

Actions to take in case of a detected gas leak, including shutting off gas and calling supplier.

LOCATING HEADER FOR USE

Safe Placement Guidelines

Crucial advice on placement to avoid heat damage to surroundings and ensure ventilation.

MAINTENANCE/STORAGE - Cleaning

Cleaning and Routine Maintenance

Steps for cleaning the exterior, checking flames, hoses, and annual inspection for insects.

MAINTENANCE/STORAGE - Storage

Storage Procedures

Instructions for storing the heater between uses and during extended periods of inactivity or transport.

TROUBLESHOOTING

Pilot Ignition Issues

Common causes and solutions for when the pilot light fails to ignite or stay lit.

Burner Ignition Problems

Probable causes and solutions for the main burner failing to ignite.

LIMITED PRODUCT WARRANTY

Warranty Terms and Conditions

Details the six-month limited warranty, exclusions, and claim procedures.