EasyManua.ls Logo

nardi FEX47D50N5 - Removing Oven Door; Replacing Oven Light Bulb

nardi FEX47D50N5
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 9 / 28
REMOVING OVEN DOOR
You can remove and clean the oven DOOR easily. You must follow the procedures below to remove the
DOOR
*Open the DOOR completely.
*Push the 2 hinges shown in the picture backwards.
*Hold the DOOR and close up to the first stopping place.
*Pull the raised DOOR away from its mounted location.
Place the hinges correctly and push downwards in order to mount removed oven DOOR back properly.
All the glass used in this appliance has undergone a special safety treatment. In the case of breakage, the
glass shatters into small square and smooth pieces which are not dangerous because they are not sharp.
Please take care and avoid thermal shocks for the glass pane, for example, never start cleaning when it is
hot.
Replacing the oven light bulb
After having disconnected the oven from thepower supply, unscrew the glass protection cap and then the
bulb and replace it with another one suitable for high temperatures (300°C /E14/230V/25W ). Remount the
glass cap and reconnect the oven.

Related product manuals