12
Before cleaning a new home, the robot needs to explore the environment and
create a map. Before first-time cleaning, you can trigger mapping by short
pressing the
Start/Stop “Start Mapping”
in the App.
Note:
1.Once a map is created, it can be edited in the App.
2.Please DO NOT move the base station after a map is created, or you have to
restart mapping. If large furniture in your home is rearranged, it is
recommended to create a new map.
3.2 Mapping
3.3 Cleaning
Select cleaning modes
The product comes with four built-in cleaning modes: Vacuum, Mop, Vacuum
and Mop, and Vacuum then Mop. You can select and adjust parameters like
cleaning cycles, suction, and mop humidity for each mode in the App.
Set Freo Advise
Freo Advise is an intelligent cleaning assistant. When the Freo Advise mode is
on, the robot can intelligently set cleaning parameters. You can enable Freo
Advise after selecting the cleaning mode in the App.
Start cleaning task
You can start the robot for cleaning in the following two ways:
•Tap
Start Cleaning in the App
•Short press the
Start/Stop
activate the Vacuum Mode by default;
Note: You can adjust the cleaning mode and set more cleaning parameters in the App.
To Next Page
Loading...
