INSTALL_OPS
MANUAL AMENDMENT
Manual: SM55 PTA12-10 Amendment #: 2
Document # SM55\100\Install_Ops\809-0002 Amendment Date: Jun 22, 2005
Amendment #2 Jun 22, 2005 Page 1
ENG-FORM: 809-0109.DOT
CONFIDENTIAL AND PROPRIETARY TO NORTHERN AIRBORNE TECHNOLOGY LTD.
The purpose of this amendment is to update the installation drawings.
Amendment Instructions:
Remove Pages Replace With Pages
1
2-3 to 2-4 Rev 4.00 Amendment #1 2-3 to 2-4 Rev 4.00 Amendment #2
Remove Drawings (Section 2) Replace or add Drawings (Section 2)
2
PTA12\100\403-0 Rev 1.10 PTA12\100\403-0 Rev 1.11
PTA12\100\403-1 Rev 1.10 PTA12\100\403-1 Rev 1.11
PTA12\100\403-2 Rev 1.10 PTA12\100\403-2 Rev 1.11
PTA12\100\403-3 Rev 1.10 PTA12\100\403-3 Rev 1.11
PTA12\100\403-4 Rev 1.10 PTA12\100\403-4 Rev 1.11
PTA12\100\405-0 Rev 1.00 PTA12\100\405-0 Rev 1.01
PTA12\100\922-0 Rev 1.00 PTA12\100\922-0 Rev 1.01
Note: Ensure that all drawings are inserted in the order shown on the latest drawing lists.
3 Update the Amendment Record sheet at the front of the manual.
4 Insert this page into the manual after the Amendment Record sheet (page ii).
Manual Amendment ends after the following amended pages