National Instruments 446 Series User Manual

NI 446X Calibration Procedure 36 ni.com
8. Modify the NI-DAQmx write property using the following function.
Call DAQmxSetAOTermCfg with the following parameters:
taskHandle:
myTaskHandle
channel: dev1/ao0
data: DAQmx_Val_PseudoDiff
LabVIEW Block Diagram
NI-DAQmx Function Call LabVIEW Block Diagram
Call DAQmxSetWriteRegenMode
with the following parameters:
taskHandle:
myTaskHandle
data: DAQmx_Val_AllowRegen
NI-DAQmx Function Call (Continued)

National Instruments 446 Series Specifications

General

Brand	National Instruments
Model	446 Series
Category	Measuring Instruments
Language	English