Need help?Do you have a question about the National Instruments USB-TC01 and is the answer not in the manual?
General| Type | Thermocouple Measurement Device |
|---|---|
| Measurement Type | Temperature |
| Thermocouple Support | J, K, R, S, T, N, E, B |
| Input Channels | 1 |
| Resolution | 0.1 °C |
| Sampling Rate | 1 Hz |
| Interface | USB |
| USB Interface | USB 2.0 |
| Storage Temperature Range | -20 to 70 °C |
| Weight | 200 g |
| Temperature Range | Depends on thermocouple type (e.g., -270 to 1820 °C) |
| Power Supply | USB Powered |
| Operating Temperature | 0 °C to 50 °C |
| Input Connection | Miniature Thermocouple Connector |
Describes pollution levels affecting device operation, from dry nonconductive to conductive condensation.
Defines voltage measurement categories (I to IV) for safe operation based on circuit connection and voltage levels.
Explains the function of the green LED on the NI USB-TC01, indicating device status and power.
Step-by-step guide to logging temperature data using the Temperature Logger application.
Information on accessing free ready-to-run applications to enhance NI USB-TC01 functionality.
Guidance on building custom applications using LabVIEW and NI-DAQmx driver software.
Details on connecting a single thermocouple, supported types, and connector specifications.
Explains the device's capability to detect open thermocouple sensor conditions via software.
Provides guidelines to minimize thermal errors by using small-gauge wire and avoiding temperature extremes.
Information on accessing online support pages for documentation, drivers, and tutorials.
Details on NI training courses for developing applications with NI products.
Resources for technical support, services, product registration, and contact information.
To Next Page
