National Instruments USB-TC01 - Safety Guidelines

USER GUIDE
NI USB-TC01
Single-Channel Thermocouple Input Module
Français Deutsch
日本語
한국어
简体中文
ni.com/manuals
The National Instruments USB-TC01 data acquisition (DAQ) device provides a Full-Speed
USB interface for a single thermocouple channel. This user guide describes how to use the
device.
For specifications, refer to the NI USB-TC01 Device Specifications document available at
ni.com/manuals.
Figure 1. NI USB-TC01 Device
Safety Guidelines
The following section contains important safety information that you must follow when
installing and using the NI USB-TC01.
Caution Operate the NI USB-TC01 only as described in these operating
instructions. Misuse of the device can result in a hazard. You can compromise the