To Next Page

To Previous Page

18 | ni.com | NI myRIO-1950 User Guide and Specifications

Safety

Safety Standards

This product is designed to meet the requirements of the following standards of safety for

electrical equipment for measurement, control, and laboratory use:

• IEC 61010-1, EN 61010-1

• UL 61010-1, CSA 61010-1

Note For UL and other safety certifications, refer to the product label or the Online

Product Certification section.

Caution Using the NI myRIO-1950 in a manner not described in this document

may impair the protection the NI myRIO-1950 provides.

Hazardous Locations

The NI myRIO-1950 is not certified for use in hazardous locations.

Electromagnetic Compatibility

This product meets the requirements of the following EMC standards for electrical equipment

for measurement, control, and laboratory use:

• EN 61326-1 (IEC 61326-1): Class A emissions; Basic immunity

• EN 55022 (CISPR 22): Group 1, Class A emissions

• EN 55011 (CISPR 11): Group 1, Class A emissions

• AS/NZS CISPR 11: Group 1, Class A emissions

• AS/NZS CISPR 22: Group 1, Class A emissions

• FCC 47 CFR Part 15B: Class A emissions

• ICES-001: Class A emissions

Note For EMC declarations and certifications, refer to the Online Product

Certification section.

CE Compliance

This product meets the essential requirements of applicable European Directives as follows:

• 2006/95/EC; Low-Voltage Directive (safety)

• 2004/108/EC; Electromagnetic Compatibility Directive (EMC)

• 1999/5/EC; Radio and Telecommunications Terminal Equipment Directive (R&TTE)

Online Product Certification

To obtain product certifications and the Declaration of Conformity (DoC) for this product, visit

ni.com/certification, search by model number or product line, and click the

appropriate link in the Certification column.

National Instruments myRIO-1950 User Manual

Other manuals for National Instruments myRIO-1950