DAQ GETTING STARTED
Read Me First:
NI-DAQmx and DAQ Device Installation Guide
Install your software before installing new hardware.
Install Application Software
Install NI application software, such as NI LabVIEW, or another application
development environment (ADE), such as ANSI C or Visual Basic .NET.
Refer to the NI-DAQmx Readme on the software media for supported
application software and ADE versions.
Back up any applications before upgrading software or modifying the
application.
Install NI-DAQmx
Install NI-DAQmx driver software before installing new hardware devices so
Windows can detect them.
1. Insert the software media. If the NI-DAQmx installer does not open
automatically, select Start»Run. Enter
x
:\autorun.exe, where
x
is
the drive letter. Complete the instructions.
2. Register your NI hardware online at
ni.com/register when
prompted.
This document contains instructions in English, French, German, Japanese, Korean,
and Simplified Chinese.
Ce document contient des instructions en anglais, français, allemand, japonais,
coréen et chinois simplifié.
Dieses Dokument enthält Anweisungen in Englisch, Französisch, Deutsch,
Japanisch, Koreanisch und vereinfachtem Chinesisch.
Ρ΅νιϋΠȂםࢊȂέρϋΑࢊȂΡͼΜࢊȂུࢊȂ܀࣭ࢊȂ۰ఘಎ࣭ࢊ
ܱȃ
㢨
ⱬ㉐⏈
㜵㛨
,
䘸⣅㏘㛨
,
⓹㢰㛨
,
㢰⸬㛨
,
䚐ạ㛨
,
㩅ạ㛨
(
ᴸ㷨
)
⦐
㉘
⮹╌㛨
㢼㏩⏼␘
.
ᴀ᭛ḷࣙ㣅䇁ǃ⊩䇁ǃᖋ䇁ǃ᮹䇁ǃ䶽䇁ㅔԧЁ᭛ⱘ䇈ᯢֵᙃDŽ
To Next Page
Need help?
General
