2 | ni.com | NI 9401 Operating Instructions and Specifications
This document describes how to use the National Instruments 9401
and includes specifications and terminal assignments for the
NI 9401. For information about installing, configuring, and
programming the system, refer to the system documentation. Visit
ni.com/info and enter the following Info Codes:
•
cseriesdoc—for information about C Series and system
documentation.
•
compatibility—for information about chassis and carrier
compatibility for the modules you are using.
•
rdsoftwareversion—for information about which software
you need for the modules you are using.
Note The safety guidelines and specifications in this
document are specific to the NI 9401. The other
components in the system might not meet the same safety
ratings and specifications. Refer to the documentation for
each component in the system to determine the safety
ratings and specifications for the entire system. Visit
ni.com/info and enter cseriesdoc for information
about C Series documentation.
To Next Page
Loading...
