Need help?Do you have a question about the National Instruments NI 9217 and is the answer not in the manual?
General| Manufacturer | National Instruments |
|---|---|
| Model | NI 9217 |
| Type | Thermocouple Input Module |
| Channels | 4 |
| Input Type | Thermocouple |
| Resolution | 24-bit |
| Operating Temperature Range | -40 °C to 70 °C |
| Bus Type | CompactDAQ |
| Isolation | Channel-to-earth |
| Isolation Voltage | 250 Vrms |
Overview of the 16-terminal screw-terminal connector and its pin assignments for RTD channels.
Details on the number of channels, ADC resolution, sampling mode, and measurement ranges for temperature and resistance.
Specifications for noise levels, noise rejection (50/60 Hz), and input bandwidth in different operating modes.
Graphical representation of the normal mode rejection versus differential input signal frequency for high-resolution mode.
Details on the module's power consumption in active and sleep modes and its thermal dissipation at 70 °C.
Specifications for screw-terminal wiring, recommended torque, and ferrule sizes for connections.
The physical weight of the NI 9217 module.
Specifies the maximum allowable voltages between terminals and to COM, and the isolation voltage ratings.
Details on channel-to-channel, channel-to-earth ground isolation voltages, including measurement categories.
Specifications for operating and storage temperature, humidity, and ingress protection ratings.
The Ingress Protection (IP) rating of the module, indicating protection against solids and liquids.
Details on the module's resistance to random and sinusoidal vibration, and operating shock conditions.
Information on the recommended calibration interval for the NI 9217 module, typically one year.
To Next Page
