6 | ni.com | NI 9401 Operating Instructions and Specifications
the product to cause interference to radio and television reception
or to experience unacceptable performance degradation, install and
use this product in strict accordance with the instructions in the
product documentation.
Furthermore, any changes or modifications to the product not
expressly approved by National Instruments could void your
authority to operate it under your local regulatory rules.
Caution To ensure the specified EMC performance,
operate this product only with shielded cables and
accessories.
Caution To ensure the specified EMC performance, you
must install a clamp-on ferrite bead (National
Instruments part number 711627-01) in accordance with
the product installation instructions. Refer to the NI 9401
product page on ni.com for purchasing information
about clamp-on ferrite beads.
To Next Page
Loading...
