Why Can't I Export Certain Types of Files for an SFP?
Refer to Data Import and Export for detailed information about the file types that
each SFP supports.
Using the So Front Panels
This topic provides an example of using the Function and Arbitrary Waveform
Generator (FGen/Arb) and the Oscilloscope to generate and display a waveform.
1.
Connect a BNC - BNC cable between the Oscilloscope CH 1 and the Function
Generator CH 1 BNC connectors on the NI ELVIS III as shown in the following
diagram:
2. Select Function and Arbitrary Waveform Generator from the Instruments tab
in Measurements Live.
3. On the FGen/Arb SFP, configure Channel 1 as follows:
Setting Value
Channel 1 Static
Waveform Sine
Frequency
100 Hz
Amplitude
2 Vpp
© National Instruments
23
NI ELVIS III Getting Started
To Next Page
Loading...
