National Instruments R Series - Unpacking the Kit; Verifying the Kit Contents

Unpacking the Kit
Caution To prevent electrostatic discharge (ESD) from damaging the device,
ground yourself using a grounding strap or by holding a grounded object, such as
your computer chassis.
1. Touch the antistatic package to a metal part of the computer chassis.
2. Remove the device from the package and inspect the device for loose components or any
other sign of damage.
Caution Never touch the exposed pins of connectors.
Note Do not install a device if it appears damaged in any way.
3. Unpack any other items and documentation from the kit.
Store the device in the antistatic package when the device is not in use.
Verifying the Kit Contents
Verify that the following items are included in the NI PXIe-7868R kit.
Figure 1. NI PXIe-7868R Kit Contents
3
2
1
1. Hardware
2. NI-RIO Media
3. Getting Started Guide
NI PXIe-7868R Getting Started Guide | © National Instruments | 3