To Next Page

To Previous Page

RMC-8356 User Manual

Intel

Virtualization Technology

Select Enable to use Intel Virtualization Technology so that I/O device assignments will be

reported directly to the VMM (Virtual Memory Management) through the DMAR ACPI Tables.

This feature offers fully-protected I/O resource-sharing across the Intel platforms, providing

the user with greater reliability, security and availability in networking and data-sharing. The

settings are Enabled and Disabled.

Hardware Prefetcher (Available when supported by the CPU)

If set to Enabled, the hardware prefetcher will prefetch streams of data and instructions from the

main memory to the L2 cache to improve CPU performance. The options are Disabled and

Enabled.

Adjacent Cache Line Prefetch (Available when supported by the CPU)

The CPU prefetches the cache line for 64 bytes if this feature is set to Disabled. The CPU

prefetches both cache lines for 128 bytes as comprised if this feature is set to Enabled.

CPU AES

Select Enabled to enable Intel CPU Advanced Encryption Standard (AES) Instructions for

CPU to enhance data integrity. The options are Enabled and Disabled.

Boot Performance Mode

This feature allows the user to select the performance state that the BIOS will set before the

operating system handoff. The options are Power Saving, Max Non-Turbo Performance

and Turbo Performance.

HardWare P-States (HWP)

Use this feature to enable or disable hardware P-States support. The options are Disabled and

Enabled.

Intel

SpeedStep™

Intel SpeedStep Technology allows the system to automatically adjust processor voltage and

core frequency to reduce power consumption and heat dissipation. The options are Disabled and

Enabled.

Turbo Mode

Select Enabled for processor cores to run faster than the frequency specified by the

manufacturer. The options are Disabled and Enabled.

Package Power Limit MSR Lock

Select Enabled to lock the package power limit for the model specific registers. The options

are Disabled and Enabled.

National Instruments RMC-8356 User Manual

Other manuals for National Instruments RMC-8356