National Instruments sbRIO-9629 - Environmental Management; Waste Electrical and Electronic Equipment (WEEE); Battery Replacement and Disposal; Battery Recycling

To Next Page

To Previous Page

Environmental Management

NI is committed to designing and manufacturing products in an environmentally responsible manner. NI recognizes that eliminating certain hazardous

substances from our products is beneficial to the environment and to NI customers.

For additional environmental information, refer to the Commitment to the Environment web page at ni.com/environment. This page contains the environmental

regulations and directives with which NI complies, as well as other environmental information not included in this document.

Waste Electrical and Electronic Equipment (WEEE)

EU Customers At the end of the product life cycle, all NI products must be disposed of according to local laws and regulations. For more

information about how to recycle NI products in your region, visit ni.com/environment/weee.

Battery Replacement and Disposal

Cd/Hg/Pb

Battery Directive This device contains a long-life coin cell battery. If you need to replace it, use the Return Material Authorization (RMA) process

or contact an authorized National Instruments service representative. For more information about compliance with the EU Battery Directive

2006/66/EC about Batteries and Accumulators and Waste Batteries and Accumulators, visit ni.com/environment/batterydirective.

Battery Recycling

The model contains a replaceable battery. Products containing lithium must be disposed of or recycled in accordance with all local laws and site regulations.

For more information about disposing of or recycling this device's battery, refer to https://www.rayovac.com/.

电子信息产品污染控制管理办法（中国 RoHS）

中国客户 National Instruments 符合中国电子信息产品中限制使用某些有害物质指令(RoHS)。关于 National Instruments 中国 RoHS 合规性信

息，请登录 ni.com/environment/rohs_china。(For information about China RoHS compliance, go to ni.com/environment/

rohs_china.)

Environmental Standards

This product meets the requirements of the following environmental standards for electrical equipment.

• IEC 60068-2-1 Cold

• IEC 60068-2-2 Dry heat

Physical Characteristics

Weight 155 g (5.5 oz)

Power Requirements

The sbRIO-9629 requires a power supply connected either to the power connector or through the VIN_filtered pins through the RMC. Refer to the Connecting

the sbRIO-96xx to Power section in the CompactRIO Single Board Controller with DAQmx Hardware Installation Manual on ni.com/manuals for information

about connecting the power supply. Refer to the CompactRIO Single Board Controller with DAQmx System Development Manual on ni.com/manuals for more

information about how to power the sbRIO-9629 through the RMC.

Notice Exceeding the power limits may cause unpredictable device behavior.

Recommended power supply

Development kit NI PS-10 Desktop Power Supply (included in kit)

Condor STD-24050

120 W, 24 V DC

OEM kit 55 W, 24 V DC, maximum

Voltage input range 9 V DC to 30 V DC

Reversed-voltage protection 30 V DC

Power consumption with RMC 55 W, maximum