Native Instruments Audio 4 DJ - Rear Panel Connections

Getting Started: AUDIO 4 DJ – 20
4.4 Using the AUDIO 4 DJ with a Turntable
To record audio from a turntable, connect the devices as pictured in the above diagram.
Make sure the volume controls of the amplier are turned down completely!
In the AUDIO 4 DJ Settings Tool’s Input Mode Selector, select Phono.
Connect the RCA cable of your turntable to the input pair of channel A or B of the
AUDIO 4 DJ, e.g. AUDIO 4 DJ (CH. A, In 1/2).
Attach the grounding wire of your turntable to the AUDIO 4 DJ’s ground screw.
Put a record on your turntable and start playing it.
1.
2.
3.
4.
5.
%
This way you can also use the
AUDIO 4 DJ for digitizing your
vinyl.
%
This way you can also use the
AUDIO 4 DJ for digitizing your
vinyl.