AUDIO 4 DJ – 8
4. Installation
This chapter explains how to connect the AUDIO 4 DJ hardware to your computer and how
to install the drivers and software required to use it.
4.1 Installation of the AUDIO 4 DJ
To make use of the AUDIO 4 DJ, you need to install its driver rst. The driver handles com-
munication between the AUDIO 4 DJ hardware and your computer.
The driver itself is not accessible: like any other driver on your operating system, it is a
piece of software loaded in the background when your system starts up. The driver takes
care of all audio and MIDI signals coming from or going to the AUDIO 4 DJ hardware
through the USB2 connection.
Although the driver itself is inaccessible, you can edit some of its settings to modify its
behavior for your audio setup.
These settings can be edited. How to achieve this will be explained in detail in chapter
7 “AUDIO 4 DJ Software.”
!
Do not connect the AUDIO 4
DJ hardware until the driver
installer prompts you as the operating
system may install the wrong drivers.
!
Do not connect the AUDIO 4
DJ hardware until the driver
installer prompts you as the operating
system may install the wrong drivers.
To Next Page
Loading...
