KORE 2 – 135
Label Function Range Unit
Rate E n v
Amount
Sets the amount of control the Envelope Follower has over the LFO-rate. -
PhaseL/R
Introduces a phase set-off between the two modulation signals for the left and the right chan-
nel, respectively.
-180…180 deg
Threshold Sets the input audio threshold level above which the modulation envelope is triggered. 0..100 %
Attack Sets the time to reach maximum level of the modulation signal once the envelope is triggered. 0..200 ms
Release
Sets the time for the modulation signal to cease after the input signal falls below the threshold
level.
0..800 ms
To Next Page
Loading...
