EasyManua.ls Logo

Native Instruments O Kore 2 - Page 136

Native Instruments O Kore 2
236 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
KORE 2 – 136
3.8.2 Auto Filter
The auto Filter acts as a touch-controlled WahWah. This effect was very
popular in Funk music of the 70ies, but can be used in a wide range of
applications from funky synthetic bass tracks to ltered drum loops.
Label Function Range Unit
Mix
Sets the balance between the dry, unprocessed signal and the
“wet” (ltered) one.
0..100 %
Cutoff
Sets the lter’s main frequency. According to the [Type] setting
all frequencies below, around or above this frequency are passed to
the output, while others are attenuated.
25..10000 Hz
Resonance
Amount
Sets the sharpness of the lter’s response peak. At higher values the lter slope becomes
steeper and the cutoff frequency more accentuated.
0..100 %
Saturation
Level
Sets the level where overdrive saturation will start to reduce the gain. At high resonances
this particularly affects the range around the cutoff frequency. At a low saturation level the
signal is saturated early while at high values higher signal peaks are possible.
-20..+20 dB

Related product manuals