KORE 2 – 137
Label Function Range Unit
Filter Type
Crossfades between three operation modes. At low values the effect works as a low pass,
ltering all frequencies above the cutoff frequency. At high values it becomes a high pass
with inverted characteristics.
In between the effect acts as a band pass, passing only frequencies around the cutoff
frequency while attenuating all others.
0..100 %
Depth Amount of modulation of the Cutoff frequency by the envelope follower. -100..+100 %
Threshold
Sets the input audio threshold level above which the modulation
envelope is triggered.
0..100 %
Attack
Sets the time taken for the modulation signal to reach maximum
level once the envelope is triggered.
0..200 ms
Release
Sets the time for the modulation signal to cease after the input
signal goes below the threshold level.
0..800
ms
To Next Page
Loading...
