KORE 2 – 149
Label Function Range Unit
Mix
Controls the balance between the dry, unprocessed signal
(at the left) and the wet, processed signal (at the right).
0..100 %
Shift
Alters the center frequencies of the eight bands simultaneously. Shift controls
all frequencies up or down logarithmically (i.e., not in Hertz but in semitones) to
maintain each band’s relative width as they move through the frequency spec-
trum.
-48..+48
semi-
tones
LR Split
Controls the offset of each band to the left or right channel.
For the left channel the value is added to the Shift setting, and for the right
channel, the value is subtracted. Experimenting
with this control produces very audible stereo effects.
-24..+24
semi-
tones
Band 1..8 Level Sets each band’s output level. [-inf]..0 dB
Gain Adjust
Controls the amount of amplication applied to the overall mixed output signal.
As a band’s level can only be lowered with the level sliders, this control can
compensate for any apparent level loss.
0..20 dB
To Next Page
Loading...
