KORE 2 – 152
3.8.13 Flex Verb
This reverb unit provides an extended parametric control of reverb with
P
re
-d
elay
, early and late reections, and separate control of low and high
frequency decay times.
Label Function Range Unit
Mix
Controls the balance between the dry, unprocessed signal
(at the left) and the wet, processed signal (at the right).
0..100 %
Pre-Delay
Sets the time by which the incoming signal is delayed
before it is fed into the main reverb effect.
0..200 ms
Size
Controls the size of the simulated reverb room, i.e.,
the reverb decay time.
1..100
Diffusion
Sets the amount of diffusion applied to the reverb signal.
With lower values, the reverb sound becomes more echo-like.
0..100 %
Early/Late
Controls the balance between the early reections and
the main reverb signal.
0..100 %
Low Cut 15..5000 Hz
Hi Cut Frequency 200..25000 Hz
To Next Page
Loading...
