KORE 2 – 180
3.8.31 Stereo Chorus
This effect implements a standard stereo chorus/anger unit: The two
input signals are delayed by a small amount, and the delay times are
constantly modulated.
Label Function Range Unit
Mix
Controls the balance between the dry, unprocessed signal (at the left) and the
wet, processed signal (at the right).
0..1
Delay Tune Sets the tuning of the effect; technically, this adjusts the effect’s delay time.
50..10000
Hz
Delay LR Offset
Controls the difference between delay times of the left and right channel. At
negative values the left channel delay is shorter; at positive values the right
channel delay time is shorter. At mid position both use the same delay time.
-100 ...
+100
%
Modulation Syn Synchronizes the frequency of the LFO to KORE 2’s time base On/Off
Modulation Rate Adjusts the delay time modulation speed, i.e., the internal LFO’s frequency. 0..10 Hz
Modulation Depth Sets the amount of modulation as a percentage of the delay time. 0..100 %
To Next Page
Loading...
