KORE 2 – 182
Label Function Range Unit
Balance
Controls the level of the left or right channel. At -1, only the left channel can be
heard; if +1, only the right channel can be heard.
-1..+1
L/R Swap If on, the left and right channels are swapped. On/Off
Split Frequency Controls the frequency at which the input signal is split into two bands. 50..12500 Hz
Lower/Upper Pan Sets the stereo position of the lower or upper bands, respectively. -1..+1
Lower/Upper Width
Controls the stereo width of the lower/upper bands, respectively. A value of 0
means centered, a value of 2 means far to the side.
0..2
3.8.33 MIDI Filter
The Midi Filter provides an easy way to lter out unwanted MIDI data
at any point in the Sound Matrix. You can dene key and velocity ranges
to allow only parts of the note message stream through. Also, there are
dedicated lters for various MIDI event types. This MIDI plug-in can be
very handy when setting up advanced KORE 2 Performances, as you have
To Next Page
Loading...
