Native Instruments O Kore 2 - 3.8.37 Step Sequencer

KORE 2 – 198
3.8.37 Step Sequencer
KORE 2’s step sequencer builds on the heritage of the old analogue
sequencers but as it is implemented in software it does not have their
limitations. This is a very exible and fun pattern generator that can be
tweaked in realtime with your KORE 2 Controller.
The S teP S eQuenCer can also work as a “master” sequencer for downstream
Midi P layerS or other sequencer components, resetting them to their rst
beat when wrapping around its loop.
The Piano Roll Edit Area
The Piano roll edit area allows you tocompose your sequences. You have
one octave of note pitches and a step timeline of 32 steps at your disposal.
Use your mousebutton (Windows: left mousebutton) to input notes on the
grid. If you want to delete a step, use the right mousebutton on windows
and Ctrl-click on Mac.
The yellow, vertical lines on the grid are the looP MarKerS. They dene the
range of notes the sequencer loops over. You can click on the thickened
%
Internal MIDI plug-ins are
handled in the same way
as any other device in KORE. This
means you can save them as a
KoreSound to recall their settings at
a later stage.