Native Instruments O Kore 2 - Page 212

KORE 2 – 212
a MultiSound or the Performance (which is a MultiSound, too), as
SingleSounds do not host a mixer structure:
Hit eSCaPe in Sound Mode until you reach the level of a MultiSound or the
top level, which is the Performance. Then hit Control on your hardware to
nd the CHannel PageS of the respective mixer level:
From here everything is the same as already described for the uSer PageS, except that
you use the leFt/rigHt buttons of your hardware to step through the channels. Hitting
Control again toggles over to the uSer PageS of the MultiSound or Performance. Again,
to sum it up:
If you have focused a SingleSound the C ontrol M ode gives access to
uSer PageS and Plug-in PageS.
If a MultiSound or the Performance is in focus the Control Mode
provides access to the CHannel PageS of the respective mixer level and
to the uSer PageS of the MultiSound or Performance.
►
►
►