KORE 2 – 214
If a Sound Variation is in use you see a letter (A to H) in its slot. In the
picture above all eight Sound VariationS are occupied.
Now you can start tweaking the S
ound
V
ariationS
with the C
ontrol
K
noBS
and B
uttonS
of your hardware. The K
noBS
and B
uttonS
each represent
one S
ound
V
ariation
. There are two modes you can use to explore them.
To switch modes hit F2 twice, which will take you to the o
PtionS
of your
hardware:
Then move down the list of oPtionS with the down button until you reach
the entry Morph Mode:
You can use the leFt/rigHt buttons or the SCrollwHeel to choose between
two MorPH ModeS:
►Free (which is the default) lets you morph between the eight S
ound
VariationS via the Knobs with complete freedom. The eight Buttons
directly jump to the respective Sound Variation.
►With Sel (SeleCt Mode) you must select a specic Sound Variation with
one of the eight Control ButtonS in order to morph to the other Sound
%
You cannot set the Morph
Mode on the software
side. You always have to use the
Options on your Kore Controller to
change it.
To Next Page
Loading...
