Native Instruments O Kore 2 - Page 215

KORE 2 – 215
VariationS using the respective Control KnoBS. In this mode the selected
and the “target” Sound VariationS act as stop positions for your MorPH.
This ensures that you always end up on a dened Sound Variation and
not somewhere in between as with the Free Mode. For example: select
Sound Variation B with Button 2 and turn the Control KnoB for Sound
Variation H. You can only move between B and H. If you use Control
K noB 6 (Sound Variation E) you can only M orPH between B and E. This
ensures reproducible results.
Both M orPH M odeS have their merits. If you just want to explore and look for
a maximum of possibilities, use F ree M ode . If you need to “land” in dened
and prepared parameter settings, the SeleCt Mode is the way to go.