Native Instruments O Kore 2 - 3.3 Global controls

KORE 2 – 42
3.3 Global controls
Some parts of KORE 2’s interface are of a global nature and independent
of the KoreSounds that currently sit in the Sound Matrix.
These are, for example, the stand-alone version’s application menu, the
g loBal P lug - in M enu of the plug-in, the g loBal H eader with its V iew buttons,
the tranSPort area, and so on.
The following sections deal with these global controls in detail.
3.3.1 Stand-alone menu
In stand-alone mode, i.e. when KORE 2 is not running as a plug-in in a
host environment, there are some additional menus that you won’t nd
in the plug-in.
In this manual we show the PC versions. On a Mac the menus look a tad
different but contain the same set of commands.
The File Menu
The File Menu provides functions to create, load, and save Performances
and KoreSounds:
New Performance creates an empty Performance.
Open Performance opens a dialog, letting you navigate your le system
to choose and load a Performance File (.kpe).”
Save Performance writes the current Performance to disk. If it has
been saved previously, the new version overwrites the old one. If it is a
previously unsaved Performance, KORE 2 presents a dialog to choose
the new Performance File’s location and name.
►
►
►
The inFo Pane is activated via a
dedicated button on the gloBal
Header of KORE 2.
The inFo Pane is activated via a
dedicated button on the gloBal
Header of KORE 2.
%
The items of this menu
that apply to the KORE
plug-in, can be found on the Global
Plug-in Menu of the plug-in.
%
The items of this menu
that apply to the KORE
plug-in, can be found on the Global
Plug-in Menu of the plug-in.