KORE 2 – 43
Save Performance As… is for writing the Performance to disk with a
new name, and to a location of your choice.
Save Performance As Sound… “converts” the current Performance to
a KORE 2 MultiSound. The B
rowSer
will come up in Save mode, you
can edit the Meta inForMation, tag it with attriButeS and save it into
the database. Please read chapter 3.7 for details about the B
rowSer
and about saving KoreSounds.
Load Sound… opens a dialog for loading a single KoreSound from your
le system. This can of course be a Multi Sound or a SingleSound.
Recent Performances presents a list of the most recently opened les,
making it easy to return to les used in recent projects.
Options… opens KORE 2’s maintenance pages. The oPtionS consist of
for tabs dealing with the database, plug-ins and the conguration of
your KORE 2 Controller and they are explained in chapter 3.3.5.
Please have a look at the separate NATIVE INSTRUMENTS Setup Guide
for details about the Audio and MIDI Settings for your system.
If External MIDI Sync is activated, KORE 2 listens on the congured
MIDI ports for a MIDI clock stream. If there is one, KORE 2’s Central
Clock runs synchronously to the incoming clock – it runs as a clock
slave. Use this to synchronize KORE 2 to other application running on
your computer or to external hardware that is producing MIDI clock
signals.
Exit closes stand-alone KORE 2.
►
►
►
►
►
►
►
►
►
To Next Page
Loading...
