KORE 2 – 51
The Midi PaniC button (the exclamation mark) sends an “all notes
off” message to all plug-ins, which turns off any “stuck” notes and
often solves other MIDI quirks. Furthermore, it resets KORE 2’s audio
engine. Use this if you are experiencing quirky note behavior or if you
“overloaded” a KoreSound with MIDI data. The keyboard shortcut for
this command is the 0 on your numeric pad.
3.3.4 Global Controller
The gloBal Controller is your one-stop interface to the Control Page
system in KORE 2. There is a dedicated chapter about controlling
KoreSounds in this manual (chapter 3.5). The gloBal Controller also
mirrors the status of your KORE 2 Controller in terms of displayed
Pages and parameter values.Toggle display of the gloBal Controller
on or off via the dedicated button on the gloBal Header (see chapter
3.2.1). It is always displayed in the upper-most region of the uPPer Pane.
With an inactive loCK button the gloBal Controller is context sensitive. This
means that it displays control elements related to the KORE 2 component
in focus. You can set the focus with your mouse by clicking on a CHannel
inSert that holds a sound or a plug-in.
►
To Next Page
Loading...
