Native Instruments O Kore 2 - Page 52

KORE 2 – 52
If the u Ser P age button is active, the displayed Pages can be u Ser P ageS
of the Performance or of any Single or Multi Sound currently focused
in the Sound Matrix.
If you have selected a MultiSound in the Sound Matrix, you can display
its CHannel PageS by activating the CHannel Page button on the gloBal
Controller.
The same goes for a focus on a channel (click its C Hannel H eader to
select it).
When there is a Single Sound currently selected in the Sound Matrix,
the CHannel Page button is replaced by the Plug-in Page button which
provides access to the Plug-in PageS of the Single Sound.
To rephrase it: When the l oCK button is inactive, the Global Controller
always provides access to the Control PageS of the Performance, or
the currently selected Multi Sound or Single Sound (which can be an
Instrument, an audio effect or even a MIDI effect).
At any time you can hit the l oCK button to keep the currently focused slot
on the Controller. This is also depicted by a Lock Icon on the focused
component on the Sound Matrix. With an active loCK button you can still
navigate all available Pages via your KORE 2 Controller.
If you want to know more about Control PageS and how to create and
manage them, refer to the dedicated section further down the text (chapter
3.5). There you will also learn about the d iSPlay , a SSign and e dit tabs, and
the Sound VariationS.
►
►
►
►
%
You can also focus KORE
components via your
KORE Controller
%
You can also focus KORE
components via your
KORE Controller