Native Instruments O Kore 2 - Page 71

KORE 2 – 71
The inPut SourCe Menu of a top-level SourCe CHannel.
When the channel sits on the top Sound Matrix level, you can either choose
None, for no input, Group Bus, for input from possible grouP CHannelS
(read on for more on this) or you can use the inputs of your audio hardware
that are presented as numbered inputs.
If the channel is part of a lower Sound Matrix level, the inPut Menu looks
slightly different. The rst two items are the same as the top level. However,
you don’t gain access to your hardware inputs. Instead, you can choose
Sound Input, which is the signals coming from the parental Sound Matrix
level.
Please note that if you do not choose Sound Input from the inPut Menu the
channel cannot receive audio from its parental Sound Matrix level.
Next on the audio taB you nd the outPut section.
The outPut deStination menu denes where the audio signals of the
respective channels will be sent. On the top level of the S ound M atrix , you
can choose between:
This is the Input Menu of a channel
sitting on a lower sound Matrix
Level.
This is the Ouput section of a top
level Mixer.