KORE 2 – 87
They get populated automatically as you build your routing structures.
You cannot change them manually.
uSer PageS are your flexible tools for setting up your own interface. By
default there are one or two pre-defined uSer PageS per KoreSound
offering the most important parameters. They can be adjusted to your
liking. You can create new uSer PageS to expand your control and
populate them with any parameter you want – no matter if it is is a
KORE 2 parameter or a plug-in parameter.
You can always see exactly which Page is being displayed. On the Header
row of the gloBal Controller there are two buttons.
The uSer Page button switches to the uSer Page of the component currently
in focus and provides access to the Page SeleCt menu. Here you can choose
which Page is displayed on the Controller. Of course you can always use
your KORE 2 Controller for navigation, too.
If you have focused a channel (by clicking its C
Hannel
H
eader
or via the
KORE 2 Controller), KORE 2 automatically switches to the corresponding
CHannel Page. The CHannel PageS assemble all Mixer controls of the
respective channel. If you set up new signal routings via the auxiliary sends,
the new controls will show up on the CHannel Page automatically.
3.
To Next Page
Loading...
