Native Instruments Scarbee MM-Bass - EQ Adjustments; Vibrato Configuration

Scarbee MM-Bass – 31
10.3 EQ
In this section the Bass, Middle and Treble can be adjusted. Beware that loading an FX pre-
set can change the EQ.
10.4 Vibrato
Here you can specify the vibrato speed and the volume of the fret noises that are automati-
cally generated in order to mimic the noises generated as the nger move back and forth on a
string. You can also decide whether to use CC#1 or Aftertouch to control the vibrato intensity.