8.
Click NEXT to continue. If the wheel was pressed correctly the following window is dis!
played.
9. Following the instructions press and release the top surface of the jog wheel at the 9
o’clock position as illustrated below.
10.
Click NEXT to continue. A window should now be displayed indicating that the jog
wheel was successfully calibrated.
11.
Click FINISH to return to the Preferences window.
" Congratulations, the push sensitivity of the left jog wheel has now been recalibrated!
Calibration in Controller Editor
Option 1: Calibrate (NEXT button)
TRAKTOR KONTROL S4 - Jog Wheel Calibration Guide - 19
To Next Page
Loading...
