Native Instruments TRAKTOR KONTROL S3 User Manual

Explains document formatting, icons, and conventions for notes and warnings.

Connects the TRAKTOR KONTROL S3 to your computer via USB cable.

Connects the S3's main outputs to an amplification system for audio output.

Connects monitor speakers or amplifier using BOOTH OUT outputs.

Connects headphones to the PHONES OUT socket on the front panel.

Connects the power supply unit to the S3 and a power outlet.

Covers final steps like switching on devices and starting TRAKTOR software.

Guides through the TRAKTOR Setup Wizard for configuring software with the controller.

Details methods for importing music files into TRAKTOR, like drag-and-drop.

Details the physical decks and their control elements for managing tracks.

Explains the mixer section, its channels, and controls for audio signal adjustment.

Guides mixing two tracks using SYNC function and basic mixer controls.

Explains using BROWSE controls to find, select, and load tracks into decks.

Covers using transport controls and Jog Wheels for track playback actions.

Guides using CUE channel and headphones to preview tracks before mixing.

Explains adjusting GAIN, channel faders, and MASTER output levels.

Details using EQ knobs to adjust high, middle, and low frequencies.

Describes manual tempo adjustment using TEMPO faders in different modes.

Explains using KEYLOCK to change tempo without altering pitch.

Guides on selecting and applying Mixer FX like Filter, Reverb, and Delay.

Instructions for setting, triggering, and removing Cue Points (Hotcues).

Covers enabling, changing, storing, and triggering loops using controls.

Tutorial on mixing tracks manually using Jog Wheels, CUE, and TEMPO faders.

Explains Flux and Reverse modes for advanced playback control.

How to use the Preparation List to organize tracks for upcoming mixes.

Guides on checking and manually correcting beatgrids for accurate SYNC.