4.2.1. Mixer Channel
The Mixer channels receive the individual audio signals from the Decks. Each Mixer channel con-
tains controls to adjust the incoming and outgoing levels, and the audio signal's frequency content.
The Mixer channels provide you with the following control elements:
(1) GAIN knob: Adjusts the input level for the incoming signal of the corresponding Deck, before it
passes the channel fader.
(2) HI knob: Emphasizes, attenuates, or removes the high frequency band of the audio signal.
(3) MID knob: Emphasizes or attenuates the middle frequency band of the audio signal.
(4) LOW knob: Emphasizes, or attenuates, or removes the low frequency band of the audio sig-
nal.
(5) MIXER FX Amount knob: The MIXER FX Amount knob controls the amount of the MIXER FX
to be applied to the audio signal. In center position the MIXER FX is disabled for the individual
Mixer channel.
(6) MIXER FX ON button: Enables or disables the MIXER FX for the individual Mixer channel.
(7) CUE button: Routes the audio signal of the Mixer channel into the CUE channel.
(8) Channel fader: Adjusts the Mixer channel’s level before the audio signal is sent to the cross-
fader and MASTER volume knob.
TRAKTOR KONTROL S3 Overview
13
To Next Page
Loading...
