2. As described in the instructions, imagine the top, flat surface of the jog wheel as the
face of a clock.
3. With one finger press at the edge of the top surface of the jog wheel lightly at the 12
o’clock position (see image below). For optimal calibration press as close to the edge
of the flat surface as possible (as shown by the red dot in the image) but do not press
on the rubber outer rim of the wheel.
4.
Release the jog wheel and click Ok. If the wheel was pressed correctly the following
window is displayed.
Calibration in Traktor
Option 1: Calibrate
TRAKTOR KONTROL S4 - Jog Wheel Calibration Guide - 9
To Next Page
Loading...
