KDF 55 MEDIA: Designed specifically for removing or reducing chlorine and water-soluble heavy metals. Can
remove up to 99% of water-soluble lead, mercury, nickel, chromium, and other dissolved metals. Is effective in
controlling the buildup of bacteria, algae, and fungi, making it ideal for use in this mixed bed design filtration.
NSF/ANSI Standard 42
CATALYTIC ANTI SCALE UNIT: As water passes through the internally mounted NaturalSof it is subjected to a
turbulent interaction with a non-sacrificial, lead free, WQA NSF 61 & 372* certified catalytic core made of a special
alloy. This alloy core has a unique surface that causes a transformation to take place as water flows across it. The
dissimilar metals and the water create a galvanic effect generating a very small electrical charge. This electric
charge causes a percentage of the calcium and bicarbonate in the water to come out of solution and into
suspension forming calcium carbonate in the aragonite state. The microscopic aragonite crystal formations remain
suspended in the water and pass harmlessly through the system. As a result there is insufficient calcium remaining
in solution to form scale in your pipework and appliances. Any Pre-Existing scale is simply washed away over time.
NSF/ANSI 61, 372
Dimensions
Overall Filter dimensions are approximately 12” x 60”
Water and Power Connections
The standard water line in and out connections are 3/4", NPT, Plastic.
The pipe size for a residential drain line should be a minimum of 1/2" (13 mm).
The unit should be located close to a drain to prevent air breaks and back flow.
An uninterrupted alternating current (120 VAC) supply is required. The control uses a transformer to supply 12
VDC. Please make sure your voltage supply is compatible with your unit before installation.
To Next Page
Loading...