Name: Naturela NPBC-V3C-1
Brand: Naturela
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Electronic pellet burner controller – NPBC-V3C-1/ NPBC-V4C-1

Select Fuel – Select the preset fuel profile settings corresponding to the currently used fuel. All

parameters for each profile must be set from Burning Setup menu in Factory Settings:

Info Fields – Set the parameters to be displayed in the information fields on the main screen from this

menu.

Choose the information to be displayed for each field from the following list:

• Flame level – Level of illumination, measured by the photo sensor

• Exhaust fan – Current speed of the exhaust fan

• Timers – If there are any active timers, this field shows when is the next action and what is it

(on/off)

• Power – The current calculated power of the burner

• Temp DHW – Temperature in the hot water heater

• Exhaust temp – Temperature of the exhaust gases

User Manual / ver 3.8 http://www.naturela-bg.com/en/ page 21 of 36

Order of the fields

and their numbers

Choose the information

to be displayed

for each field

Other manuals for Naturela NPBC-V3C-1

Questions and Answers:

Need help?

Do you have a question about the Naturela NPBC-V3C-1 and is the answer not in the manual?

General